home *** CD-ROM | disk | FTP | other *** search
- Path: sbdsk0838.sbrc.hac.com!user
- From: eraugust@igate1.hac.com (Eric R. Augustine)
- Newsgroups: comp.sys.amiga.networking
- Subject: Re: AmiTCP newbie needs help
- Date: Tue, 16 Apr 1996 08:31:55 -0800
- Organization: HAC
- Message-ID: <eraugust-1604960831550001@sbdsk0838.sbrc.hac.com>
- References: <4ku0lp$rk9@news.internetmci.com>
- NNTP-Posting-Host: 147.21.65.10
-
- In article <4ku0lp$rk9@news.internetmci.com>, dgentry@vlsi4.racal.com
- (Dave Gentry) wrote:
-
- > After I dial in, do I type 'startnet' from the command line, or do I
- > type AmiTCP from the command line?
-
- The assumption here is that you have configured AmiTCP to use ppp rather
- than anything else. Once you have this done you need to create a ppp
- script (using the dialer provided in the ppp package) If you follow the
- instructions in the ppp package you will be adding the ppp startup to
- startnet and hence all you will need to do is type startnet to get going.
-
- Using another dialer with ppp is do-able but the one provided with the
- device is probably the best choice.
-
- .trog--
-
- This is my opinion and not that of my employer and should therefore not be considered anything my employer would say or support.
-